• All these alternators are suitable for land and marine applications.
• Stamford alternator: Cummins Generator Technologies was founded in 1904, it produces alternators under the Stamford® brand which has set the industry standard. Stamford alternator utilizes wire-wound (random winding) technology and with a power range extending from 4kVA to 5000kVA, suitable for nearly all generator set configurations.
• Leroy-Somer alternator: 4-pole alternator conforms to the key international standards and regulations below: IEC 60034, NEMA MG 1.32 - 33, ISO 8528/3, CSA, UL 1446, UL 1004. It can be integrated into CE marked generator sets.
• Sinocox alternator: compliant with national and international standards such as IEC60034, NEMA MG1-22, IS08528, CSA C22.2-100, VDE 0530, GB755, etc. Power range of 8.1kVA-2790kVA.

The SGC 420 controller has an advanced battery charge management capability and is specially designed for AMF applications with a mechanical and electronically controlled engine (CANbus).

Standard Features

• Support automatic, manual and remote start/stop modes;
• Can supervise engine safety, electrical load, site battery backup voltage and shelter temperature to cut down on fuel consumption.
• The real time clock (RTC) precisely logs up to 100 events and conducts data analysis.
• Auto exercise mode (2 events) allows to start and stop the generator set for for a preconfigured time.
• Built-in electronic speed governor is adopted for variable-speed monitoring.
• Able to monitor voltage, frequency, load current and power factor of the generator set.
• Provided with digital outputs of start relay, fuel relay, alarm horn and more.
• Counters for engine starts, engine trips, engine running hours, generator set kWh, kVAh, kVArh and Mains kWh, kVAh, kVArh.

• Modbus RS485 is available.
• Various parameters can be easily configured by connecting to a PC through the USB Type B port and using DEIF Smart Connect utility software.
• CAN ports are available for engine communication.

• 7 analogue inputs, all configurable
• 9 digital inputs, all configurable
• 7 digital outputs, all configurable

The AGC150 controller is a microprocessor-based digital programmable control unit that has all of the functions needed to control and protect a generator set, a mains breaker and a bus tiebreaker. It can be used individually to control one generator set, or in combination with multiple controllers as a part of a complete power management system for synchronizing projects, islanded or paralleled to the mains.

Standard Features

• It can be used as a single control unit for one generator set, or in combination of up to 32 controllers as a part of a complete power management system for synchronizing projects, islanded or paralleled to the mains.
• All necessary 3-phase measuring circuits are contained in the controller, and all values and alarms are shown on the sunlight readable LCD display.
• Hybrid power support: generator controller in the micro-grid system and DEIF ASC-4 controller (PV and Battery).
• Graphical display: important information of generator set and system can be easily accessed and viewed.
• Built-in analogue AVR and GOV control, eliminating the need for additional equipment (voltage and PWM).
• The controller can work together with the latest electrical Tier 4 Final engine, and display values required by emission standards.
• It supports emulation for testing and frontload commissioning.
• Up to 500 events (can be exported to a CSV file), and up to 500 alarms (can be exported to a CSV file).

• Engine communication can be achieved via CANbus.
• Communications ports are available in USB, RS485 and Ethernet ports.

• 12 digital outputs (configurable)
• 12 digital inputs (configurable)
• 2 analogue outputs (-10 to 10 V)
• 4 multi-inputs:
  ▫▫Resistor, 0 to 4000 Ω
  ▫▫Voltage, 0 to 10 V
  ▫▫Current, 4 to 20 mA
  ▫▫Digital input
• PLC function
• Support CIO modules: AGC 150 controller supports CANbus based I/O, increasing the number of inputs and outputs.

Notes:
1. 50Hz/1500rpm generator set, voltage 400V/230V;
2. MAN gas engine;
3. Gas supply pressure below 50Kpa;
4. Electrical control system; intake valves and water tanks can be configured as per your request;
5. When requesting for quotation, you need to provide us with gas composition, and required intake gas pressure and volume;
6. If you have special requirements on the project, we can modify the configurations after consulting with our technicians;

Notes:
1. 60Hz/1800rpm generator set, voltage 380V/220V;
2. MAN gas engine;
3. Gas supply pressure below 50Kpa;
4. MOTORTECH electrical control system;
5. Dungs valve;
6. Vertical water tank;
7. You need to provide us with the composition of special gas;
8. If you have special requirements on the project, we can modify the configurations after consulting with our technicians;